
Parkland Epoxy is Parkland's concrete flooring contractor for epoxy coatings, polished concrete, and pool deck resurfacing - serving Parkland homeowners since 2015 with free on-site estimates and same-week scheduling.

Most Parkland garages sit above a water table that pushes moisture up through the slab year-round. Our epoxy floor coatings process starts with a moisture test before any coating touches the floor, so your new finish bonds properly and holds up through South Florida's humidity.
Parkland's intense UV exposure bleaches and erodes unprotected pool deck surfaces fast. We apply slip-resistant coatings built for Florida's sun and afternoon rain so your deck stays safe, sealed, and looking sharp through every pool season.
Homes in Parkland's gated communities - Heron Bay, Watercrest, and others - are held to high visual standards. A coated garage floor meets HOA expectations and protects your slab from oil, heat, and the wear that comes with Florida's climate.
Driveways and patios in Parkland take a beating from summer storms and relentless UV. Sealing your concrete after the rainy season closes the pores, blocks moisture intrusion, and prevents the spalling and cracking that Broward County's climate accelerates.
Parkland homeowners converting bonus rooms or screened lanais into year-round living spaces increasingly choose polished concrete for its clean look and easy maintenance. It suits the open-plan homes common in this part of Broward County.
Homes built in Parkland's 1990s-2000s boom now have driveways and patios showing their age. Resurfacing restores the surface without the cost of tearing out and replacing the slab - the right call when the structure is still solid but the top layer is worn.
Parkland's soil sits close to the Everglades water table, which means concrete slabs here hold more moisture than in most parts of the country. That moisture is the leading cause of epoxy and coating failures in South Florida - when it is not addressed before installation, it works its way up through the concrete and pushes the coating off from below. A contractor who does not test for and manage slab moisture before starting is going to leave you with a floor that looks right for a season and then starts peeling.
On top of the moisture challenge, Parkland gets roughly 3,000 hours of sunshine per year and sits inside South Florida's hurricane corridor. That combination of UV exposure, storm-season rain, and periodic high winds puts concrete surfaces through cycles of stress that accelerate wear faster than in cooler, drier regions. Most homes in Parkland were built between 1990 and 2010, which puts driveways, pool decks, and patios in the 15-to-35-year range - the window when surface problems become unavoidable without proper coating, sealing, or resurfacing.
Parkland Epoxy has worked throughout Parkland regularly since 2015, and many of our projects have been in HOA communities where the association requires documentation or material approval before exterior work begins. We know to ask about HOA rules early and to provide the paperwork your community management expects - so the job does not stall halfway through.
Parkland's main corridors - Holmberg Road, Nob Hill Road, and Loxahatchee Road running west toward the Everglades boundary - cut through communities with very different lot sizes and property types. Homes near Pine Trails Park tend to be older builds with more surface wear; properties along the western edge of the city in communities like Heron Bay typically have larger pool decks and more exterior concrete that needs attention. We approach both differently.
We also work regularly in Coral Springs, directly to the south, where the housing stock and climate conditions are similar. If you are in Parkland and your neighbor is across the city line in Coral Springs, we handle both without any change in service quality or scheduling priority.
Reach out by phone or through the contact form. We will respond within one business day - often the same day - to gather basic details and set up your on-site visit. No commitment at this stage.
We visit your Parkland property, inspect the concrete, and test for moisture - especially important given the local water table. You get a written, itemized estimate before any work begins, so there are no surprises on the invoice.
Our crew grinds and preps the surface on day one, then applies the coating system on day two. The space needs to be cleared before we arrive - we handle everything from that point forward.
After the cure period (typically 24-72 hours depending on the system), we walk through the finished work with you and explain exactly how to maintain the surface in Parkland's climate.
We serve Parkland, FL and surrounding Broward County communities. Free estimates, no pressure.
(754) 294-8165Parkland is a planned city in western Broward County with a population of about 35,000 people. It is made up almost entirely of single-family homes, a large share of them inside gated communities managed by homeowners associations. Neighborhoods like Heron Bay, Parkland Golf and Country Club, and Watercrest are well known throughout the region. Median home values sit well above the Broward County average, and owner-occupancy rates are consistently high - most people who live here plan to stay, and they invest in their properties accordingly.
The city borders the Everglades on its western edge and sits on flat, low-lying land where the water table can be surprisingly close to the surface. Most of the housing stock was built between 1990 and 2010, which means the bulk of the city's driveways, pool decks, and exterior concrete is now entering the 15-to-35-year window where surfaces need attention. Parkland is bordered by Coral Springs to the south, a larger city with a similar housing profile, and both communities share the same climate conditions that drive concrete maintenance needs. The City of Parkland was incorporated in 1963 and has been one of the fastest-growing municipalities in Broward County.
Durable, seamless epoxy coatings that protect and beautify any concrete floor.
Learn MoreHeavy-duty epoxy systems built to withstand demanding commercial and industrial environments.
Learn MoreTransform your garage floor with a tough, easy-to-clean epoxy coating.
Learn MoreFast-curing polyaspartic coatings that deliver lasting performance in one day.
Learn MoreStunning metallic epoxy floors that combine striking aesthetics with superior durability.
Learn MoreChemical- and heat-resistant urethane cement flooring for the toughest environments.
Learn MoreGleaming polished concrete that enhances any space with a low-maintenance finish.
Learn MoreRichly colored stained concrete floors that add lasting character to any room.
Learn MoreClassic terrazzo flooring crafted for elegance and exceptional long-term durability.
Learn MoreMoisture-resistant basement flooring solutions that keep lower levels dry and attractive.
Learn MoreProfessional concrete grinding and prep work for flawless coating adhesion.
Learn MorePenetrating and topical sealers that guard concrete against moisture, stains, and wear.
Learn MoreRestore worn concrete surfaces with decorative overlays at a fraction of replacement cost.
Learn MorePerfectly flat self-leveling overlays that correct uneven floors before any finish coating.
Learn MoreSlip-resistant pool deck coatings that refresh and protect outdoor concrete surfaces.
Learn MoreComplete stripping and removal of old coatings to prepare floors for fresh installation.
Learn MoreCall us today or submit your project details online - we respond within one business day and serve all of Parkland and Broward County.